How To Put The Chain On A Chainsaw
If you're reading this post, so congratulations. You've stumbled into 1 of the all-time archetype chainsaw blunders.
Getting your chainsaw chain direction correct, is a common source of frustration for anyone who never had the good fortune of being shown the easy manner.
A chainsaw doesn't cut right with a backwards chain. Plus, from a safety perspective: if the chain is backwards all the cutters are facing yous! Chain direction is not rocket science, just it's very important for running a chainsaw effectively (and safely).
We're gonna get you up-and-running, and it'll simply have 3ish minutes (go alee, time me). Follow these 4 steps to become your chainsaw concatenation headed in the right direction.
If you just want to double check a concatenation that's already in-place, skip to stride 3, which will show you a quick way to cheque.
Get Chainsaw Chain Direction Correct
1. Remove the chainsaw casing
First thing's first, get prepare to supplant your chainsaw chain. This means removing the side casing from your chainsaw then you can get to the bar and chain.
Great – so far and so expert!
This will let you get to the bar and chain.
2. Remove the chain
Accept the bar and chain off of the chainsaw. Lay everything out.
Nosotros'll exist getting to the adept stuff next.
3. Place the direction of the cut
There are 3 things on a chain that you can check actually easily, to make certain it's pointed in the right direction.
Check out the notes on the photo below:
Honestly, probably just one of the iii methods here would work fine, but if you desire to exist super thorough, you lot could check all three.
First thing to check is the drive link, which should be pointing forrad. The drive link is the wave-shaped piece that fits into groove on the chainsaw bar. If that little wave is pointing towards the end of the bar (e.g. frontward), then your chain is pointed in the correct direction.
Y'all can also bank check the cutter, which should also be pointing forward. The cutter is the simply office of a chain that actually cuts the wood (the proper name says it all). At that place'south a couple means you tin can tell which way the cutter is facing. You tin can touch it (maybe non the safest choice, be conscientious, or use a different method). Or, you tin can also tell from the shape of the metal. The front of the cutter is typically taller and more open than the back of the cutter.
Lastly, you tin check that the guide is immediately in front of the cutter.The guide is often misunderstood. It's actually not a cut blade at all. It's purpose is to control the amount of wood that is sliced by the cutter at a fourth dimension (which controls the aggressiveness of the cutting).
If any of this chain component terminology is unclear to you, or if yous're simply interested to acquire more, check out this in-depth caption of the anatomy of a chainsaw concatenation.
4. Reassemble and tighten
In one case you've got your chain direction figured out, it'due south fourth dimension to put everything back together.
You may already know how to do this pace, but if you don't, no worries. Nosotros have a footstep-by-stride guide for how to do that (with pictures), in this mail service.
Bonus: when to replace a chainsaw chain
If you're checking your chain management, so information technology might exist considering you aren't getting the speed or quality of cut that you were expecting. Chain direction will definitely brand it harder to finish a cut. However, even if you have the chain on properly, y'all might come across speed/quality issues if your chain is wearisome or damaged.
And then, I've added this section to assistance you lot evaluate if your chain issue is actually from a boring/damaged concatenation, one time you lot've already checked the direction.
Stihl, one of the globe's leading chainsaw manufacturers, has a great article nearly the 5 signs that a chainsaw chain is ho-hum, which I've summarized below:
v signs a chainsaw chain is dull
- You have to push the chainsaw to make a cut (the chain should do the work for yous).
- The chainsaw makes fine sawdust, instead of large wood fries
- Things start smoking (despite proper lubrication and concatenation tension)
- The chainsaw "pulls" in i direction, creating a crooked cut
- The chainsaw shakes or bounces while cutting
If your chainsaw is doing any of the to a higher place, then you likely have a irksome or damaged concatenation.
Should I sharpen or supercede my chain?
Your next step will be to evaluate further, by only examining the chain in club to discover whatever chipped, damaged, or cleaved links. If there is clear damage or missing pieces, then y'all should go alee and replace your chain.
Yet, if the concatenation appears to be intact and in good shape, then sharpening it will probably exist sufficient. A good concatenation can usually handle a couple dozen sharpenings, depending on how much material y'all have off each fourth dimension.
Chain manufacturers also include markings on the top/side of a chain's cutter links, and on the chain's guide links, which show how much material tin can be safely removed. Come across photos below for an example of these markings.
Putting it simply, don't apply a chain that has been sharpened beyond these markings. That'south not rubber. One time y'all come upwardly to those lines, it'south time to replace your chain.
Wrap-upward
Alright, there you have it. By using the techniques above, y'all should be able to quickly go your chainsaw concatenation direction correct, every fourth dimension. And with the other steps, you should take everything you demand to fix that backwards, dull, or broken chain.
If you accept any questions, feel complimentary to shoot us a note. We'd beloved to aid.
Also, if this article answered your question, and so I'd love for you lot to share information technology with someone else who might find information technology useful.
That's all for now. Thank you for reading!
Source: https://burlybeaver.com/chainsaw-chain-direction/
Posted by: jenningswelaidene.blogspot.com
0 Response to "How To Put The Chain On A Chainsaw"
Post a Comment